氣相色譜六通閥氣體進樣技巧
氣相色譜六通閥氣體進樣技巧 詳細信息：
氣相色譜常壓氣體六通閥進樣中應注意的事項和某些技巧,恰當應用這些技巧有助于分析的精度和重現性.
在氣相色譜法,庫侖法儀器分析中,氣體進樣操作不當是定量分析誤差的主要來源之一.進樣系統的原理,結構,使用的材料,進樣時的溫度,進樣量,進樣速度,進樣用的工具都會對分析結果的重復性和準確性產生直接影響.以氣相色譜氣體分析為例說明常壓氣體進樣時六通閥定體積進樣的使用.
應用實例：環境空氣/固定污染源廢氣中非甲烷總烴的測定
滕州市浩瀚色譜儀器技術服務有限公司，通過采用三通連接兩個具有1.0m L定量環的六通閥,以雙柱單FID檢測器的氣相色譜儀對環境中的非甲烷總烴進行測定。總烴的濃度扣除甲烷濃度和氧的干擾,即可得到非甲烷總烴的濃度,可以實現當次分析樣品,得到包含總烴、甲烷的圖譜,完成總烴、甲烷、非甲烷總烴濃度的測定。當進樣體積為1.0m L時,總烴的檢出限為:1.6×10-2mg/m3,甲烷的檢出限為:1.3×10-2mg/m3。采用單FID檢測器,單次注射樣品,消除多次注射樣品和雙FID檢測器因靈敏度差異引起的誤差;同時,改進沒有使用十通閥等復雜且并不常用的配件,充分利用了實驗室現有的儀器條件,適合條件類似的實驗室進行改進。
氣相色譜六通閥氣體進樣技巧 圖片及安裝圖紙：
Gas sampling technique with six-port valve for gas chromatography
Gas sampling technique with six-port valve for gas chromatography
Matters needing attention and some skills in the six-way valve sampling of atmospheric gas in gas chromatography.Appropriate application of these skills helps to ensure the accuracy and reproducibility of the analysis.
In gas chromatography and coulometric instrument analysis, improper gas sampling operation is one of the main sources of quantitative analysis errors. The principle, structure, materials used, temperature at the time of injection, sample volume, and sample injection Speed and the tools used for sample injection will have a direct impact on the repeatability and accuracy of the analysis results. Take gas chromatography gas analysis as an example to illustrate the use of six-way valve fixed-volume injection during atmospheric gas injection.
Application example: Determination of non-methane total hydrocarbons in ambient air/statio
nary pollution source exhaust gas
Tengzhou Haohan Chromatography Instrument Technology Service Co., Ltd. uses a three-way co
nnection with two six-way valves with a 1.0 mL quantitative ring to determine the total non-methane hydrocarbons in the enviro
nment by a gas chromatograph with a double column and a single FID detector. The co
ncentration of total hydrocarbons deducts the interference of methane co
ncentration and oxygen, and the co
ncentration of non-methane total hydrocarbons can be obtained, which can realize the current analysis of samples and obtain a map co
ntaining total hydrocarbons and methane, and complete the co
ncentration of total hydrocarbons, methane, and non-methane total hydrocarbons. Determination. When the injection volume is 1.0ml, the detection limit of total hydrocarbons is 1.6×10-2mg/m3, and the detection limit of methane is 1.3×10-2mg/m3. Using single FID detector, single injection of samples, eliminating errors caused by multiple injection samples and dual FID detectors due to sensitivity differences; at the same time, the improvement does not use complicated and infrequent accessories such as ten-port valves, making full use of the laboratory The existing instrument co
nditions are suitable for improvement in laboratories with similar conditions.
Gas Chromatography Six-way Valve Gas Sampling Skills Pictures and installation drawings:
本頁產品地址：http://www.521uz.com/sell/show-9010624.html
王曉瑩(先生) 總經理 （來電時請說是從給覽網看到我的)
免責聲明：以上所展示的[PMF-6 氣相色譜六通閥氣體進樣技巧]信息由會員[浩瀚色譜（山東）應用技術開發有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
