ZY6014垂直水平燃燒試驗機
Vertical horizontal burning test machine
本機適用于各種電線電纜緣被覆材料、印刷電路板材料,IC緣體等有機材料之耐燃燒性試驗.試驗時,將試件至于火焰頂端,燃燒15秒,熄滅15秒,重復5次后檢查試件被焚情形,可設定燃燒,熄滅時間及重復次數,并可自動操作。
適用于UL1581.UL13.UL444.UL1655之VW-1以及CSA之FT-1。
The machine is suitable for all kinds of wire and cable insulation coating material, printed circuit boards,
IC insulation resistance to combustion of organic materials such as test. Test, the specimen for the top of
the flame, burning for 15 seconds, put out in 15 seconds, repeat 5 times after examining the specimen was
burning, burning can be set, and extinguished repetitions, and automatic operation.
Apply to UL1581. UL13. UL444. UL1655 of VW FT - 1-1 and CSA.
一、垂直燃燒箱：按照UL1581標準尺寸制作，內部尺寸為305*355*610mm。
二、水平燃燒箱：按照UL1581標準尺寸制作，內部尺寸為305*355*610mm。
三、垂直火花噴嘴：噴嘴角度是20度，帶氣體控制閥。
四、水平火花噴嘴：噴嘴角度是90度，帶氣體控制閥。
五、垂直或水平噴嘴選擇模式。
六、選擇人工/自動模式。
七、在達到預設的數據時，機器會自動停止測試。
八、燃料：瓦斯.甲烷(客戶自備)
九、試驗長度：300mm(水平)，457mm
A, vertical combustion box: according to UL1581 standard size production, internal size is 305 * 355 * 355 mm.
Second, the level of combustion box: according to UL1581 standard size production, internal size is 305 * 355
* 355 mm.
Three, vertical spark nozzle: the nozzle Angle is 20 degrees, with gas control valve.
Four, level spark nozzle: the nozzle Angle is 90 degrees, with gas control valve.
Five, the vertical or horizontal nozzle selection mode.
Six, selec manual/automatic mode.
Seven, when reached the preset data, the machine will automatically stop the test.
Eight, fuel, gas, methane () by advertisers
Nine, test length: 300 mm (level), 457 mm
本頁產品地址：http://www.521uz.com/sell/show-4362904.html
免責聲明：以上所展示的[ZY6014 垂直水平燃燒試驗機]信息由會員[東莞中諾臺灣質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
