| 提交詢價信息 |
| 發布緊急求購 |
價格:電議
所在地:廣東 深圳市
型號:TGR6000
手機:13530851851
電話:0755-33217630 33217631
更新時間:2024-09-19
瀏覽次數:2144
公司地址:廣東深圳市龍崗區南灣街道下李朗社區平吉大道9號華熠大廈A區1211
深圳市深東金儀器有限公司早在1996年香港成立香港東金電子有限公司,在2006年10月28在深圳成立深圳市福田區華強廣場東金電子儀器經營部。我們以銷售電子測量儀器儀表為主要業務,為客戶提供zui新型、高品質的測試儀器。并以合理的價格、完善的售前及售后服務,使客戶得到平等、互惠的對待。我司的銷售人員擁有多年從事儀器行業銷售的工作經驗,能為您們提供專業的意見和分析,我們擁有豐富維修經驗豐富的工程師為您們提供技術支持與技術培訓;可以快捷地幫客戶解決測試方面的問題。同時我公司也系統集成方案的供應商,曾為多家大型上市公司設計中央系統集成方案也很好地解決了客戶長期解決不了的生產測試難題,也節省了生產的成本;也在行業中樹立了良好的口碑。
深圳市深東金儀器有限公司主營:數字/模擬電視中央信號源、數字信號源/發生器/碼流卡、電視信號發生器、示波器、音視頻分析儀、安規測試儀、EMC測試儀、LCR測試儀、GPS信號發生器,HDMI高清信號源,彩色分析儀,DMB-TH/DVB-T/ATSC/ISDB調制器與功率放大器、示波器電源等儀器;主營的品牌有:西班牙Promax、美國力科(LeCory)、德國偉視(WISI)、日本橫河(Yokogawa)、臺灣固緯(GWinstek)、日本菊水(KIKUSUI)、美國是德(安捷倫)、日本營電(EIDEN)、日本LEVEAR,英國比克PicoScope等;同時我公司還有自主品牌寶碼(Pro-instrument)是我司穩步發展的動力.
我們秉承“顧客至上,銳意進取”的經營理念,堅持“客戶一”的原則為廣大客戶提供優質的服務和geng好的測試方案,客戶的滿意就是我們前進的zui大動力。所以在互聯網發展迅猛的今天,我司在立足深圳,放眼世界,將我們的品牌服務做強做大,為客戶geng好地服務。您的滿意就是我們前進的zui大動力。
The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications wher
0MHz to 6000MHz frequency range
10Hz setability, +/-1ppm frequency stability
Locking to external frequency standard
-110dBm to +7dBm amplitude, 0.1dB steps
Fast stepping sweep with dwell times down to 10ms
List sweep of up to 1000 points of amplitude vs frequency
User compensation tables for specific test set-ups
Storage for 12 generator set-ups and 16 sweep lists
Compact half-rack 2U casing uses minimum bench space
Full remote co
Significantly lower cost than other 6GHz generators
| Technical specification | |
| Frequency | |
| Frequency Range | 10MHz to 6000MHz |
| Setting Resolution |
10Hz by direct keyboard entry, or in user-set increments of 10Hz to 999?999MHz by rotary co |
| Phase Noise | 500MHz Carrier: <-110dBc/Hz @ 20kHz offset; <-120dBc/Hz @ 100kHz |
| 3GHz Carrier: <-95dBc/Hz @ 20kHz offset; <-110dBc/Hz @ 100kHz offset | |
| 6GHz Carrier: <-89dBc/Hz @ 20kHz offset; <-104dBc/Hz @ 100kHz offset | |
| Residual FM | Equivalent peak deviation for 300Hz to 3.4kHz B/W: 12Hz at 500MHz carrier |
| Settling Time | <8ms to settle within 100Hz or 0.1ppm of final frequency, if greater |
| Reference Frequency | Internal or External (via rear panel BNC) |
| Internal Accuracy | +/- 1 ppm over 15°C to 30°C; +/- 2 ppm over 5°C to 40°C |
| Internal Stability | < +/-1ppm/year ageing |
| Internal Ref. Out | 10MHz from 50 Ohms, amplitude 2V pk-pk into 50 Ohms |
| External Ref In | 10MHz into 50 Ohms, amplitude 2V pk-pk to 5V pk-pk |
| Output Level | |
| Level Range | –110dBm to +7dBm (0.1μV to 500mV into 50 Ohms) |
| Setting Resolution | 0.1dB (or 0.01μV to 1mV) by direct keyboard entry, or in user-set increments of 0.1dB to 100dB (or 0.01μV to 100mV) |
| Accuracy | Better than ± 2dBm |
|
Harmo |
<-25dBc at +7dBm. <-30dBc@levels <=0dBm 30 to 6000MHz, <-25dBc@levels <=0dBm 10 to 30MHz |
|
Sub-Harmo |
<3000MHz : None. >3000MHz :<–40dBc (typ) @ +7dBm |
|
Non-Harmo |
<–50dBc >10kHz offset 10 to 3000MHz,10kHz offset 3000MHz to 6000MHz |
|
Output Co |
Type N |
| Sweep | Frequency and amplitude sweep |
| Step Sweep | Step frequency and/or amplitude according to a formula over a specified number of points |
| Dwell Time | Individually programmable 0.01 to 10.000sec per step |
| Max Points | 1000 |
| Sweep Run |
Co |
| Step Spacing | Linear or logarithmic |
| Sweep Triggering | Manual, Ext. signal, timed (0.1 – 999.9sec) or via remote interface |
| Sync Signal | Output Stable) available during dwell time. Programmable as high or low |
| List Sweep | As for Step Sweep except that a user defined table of frequency, amplitude and dwell time values defines the steps. The table can be created within the instrument or downloaded via the remote interfaces |
| Max Points | 1000 |
| List Storage | Up to 16 Sweep Lists can be stored permanently within the instrument |
| Point Trigger | Each point in a sweep (step or list) can be subject to a trigger event rather than a dwell time. Trigger by Manual, Ext. signal or via remote interface |
| Trim | (User Level Compensation Tables) |
| Function | A table of frequency/gain pairs allows the user to modify the generator output level with respect to frequency to calibrate an entire test set up or improve the calibration of the generator alone |
| Max Points | 100 |
| Interfaces |
Full digital remote co |
| RS-232 | 9-pin D connector. Variable Baud rate 1200 and 115200 Baud |
| USB | USB 2.0 connection. Operates as a virtual COM port |
| GPIB (IEEE-488) |
Co |
| LAN (Ethernet) |
Standard 10/100 ba |
| General | |
| Size and Weight | 2U (86.5mm) height; half-rack (213mm) width; 350mm long. 3.65 kg. (8 lb) |
| Power | 110-240VAC ±10% 50/60Hz; 100-120VAC ±10% 400Hz; 60VA max |
| Approvals | Complies with EN 61010-1 (Safety) and EN61326 (EMC) |
Operating manual, driver software, power lead

| zui大頻率 | 6000MHz | |
| zui小頻率 | 10 兆赫 | |
| 分辨率 | 0.1 dB | |
| 掃描 | 線性,對數 | |
| 接口類型 | GPIB,LAN,RS232,USB | |
| 尺寸 | 350 x 213.5 x 86.5mm | |
| zui高工作溫度 | +40°C | |
| 型號(P) | TGR 6000 | |
| 高度 | 86.5mm | |
| 插頭類型 | Type C - European Plug, Type G - British 3-pin | |
| 重量 | 3.65kg | |
| zui低工作溫度 | +5°C | |
| 長度 | 350mm | |
| 數據輸入 | 鍵盤 | |
| 輸入 | 交流輸入,參考輸入,觸發輸入 | |
| 寬度 | 213.5mm | |
| 顯示器類型 | 20個字符′4行 |
免責聲明:以上所展示的[TGR6000 AIM-TTI射頻信號發生器6GHz]信息由會員[深圳市深東金儀器有限公司]自行提供,內容的真實性、準確性和合法性由發布會員負責。| 詢價標題 | |
| 聯系人 | |
| 電話 | |
| 主要內容 | |
| 驗證碼 | |