Q8/UV紫外光加速老化試驗機主要用于模擬對陽光、潮濕和溫度對材料的破壞作用；材料老化包括褪色、失光、強度降低、開裂、剝落、粉化和氧化等。紫外光加速老化試驗機通過模擬陽光、冷凝、模仿自然潮濕，試樣在模擬的環境中試驗幾天或幾周的時間，可再現戶外可能幾個月或幾年發生的損壞。
Q8/UV紫外光加速老化試驗機中，紫外燈的熒光紫外等可以再現陽光的影響，冷凝和水噴淋系統可以再現雨水和露水的影響。整個的測試循環中，溫度都是可控的。典型的測試循環通常是高溫下的紫外光照射和相對濕度在100％的黑暗潮濕冷凝周期；典型應用在油漆涂料、汽車工業、塑膠制品、木制品、膠水等。 模擬陽光
陽光中的紫外線是造成大多數材料耐久性能破壞的主要因素。我們使用紫外燈來模擬陽光中的短波紫外部分，它產生很少的可見光或紅外光譜能量。我們可以根據不同的測試要求選擇不同波長的UV紫外燈，因為每種燈在總的紫外線輻照能量和波長都不一樣。www.oven.cc 通常，UV燈管可分為UVA和UVB兩種。
UVB-313燈管：UVB-313 燈管發出的短波紫外光比通常照射在地球表面的太陽紫外線強烈，從而可以zui大程度的加速材料老化。然而，該燈管可能會對某些材料造成不符合實際的破壞。UVB-313 燈管主要用于質量控制和研究開發，或對耐候性強的材料運行測試。
|
型號 Model
|
Q8/UV3
|
Q8/UV2
|
Q8/UV1
|
|
UV 照射 Exposure
|
●
|
●
|
●
|
|
冷凝 Condensation
|
●
|
●
|
●
|
|
光照控制 Irradiancs Control
|
●
|
●
|
|
|
可調光線 Adjustable irradiance
|
●
|
●
|
|
|
噴水 Water Spray
|
●
|
|
|
|
熱沖擊 Thermal Shock
|
●
|
|
|
|
自動偵路 Self-diagnostics
|
●
|
●
|
●
|
|
燈泡數量 Lamp Q'ty
|
紫外線燈管 8 支，備品 4 支 Ultravloiet lamp 6pcs, spares 4 pcs （美國Q-LAB,Q-Panel,美國ATLAS,UVA340,UVB313,UVC351）
|
|
記錄器 Recorder
|
選配 （Optional）
|
|
輻射計 Q8-CR Calibration Radiometer
|
選配 （Optional）
機器輻射強度：
1.0W／m2／340nm以內可調
1.1W／m2／313nm以內可調
|
|
UV 溫度 Temp
|
50 ℃ -75 ℃
|
|
冷凝溫度 Condensation Temp
|
40 ℃ -60 ℃
|
|
測試容量 Test Capacity
|
48pcs 片/se spray（ 75 x 150m m ）
50pcs片/basic （ 75 x 150m m ）
|
|
水涼及耗量 Water
|
蒸餾水每分鐘 蒸餾水每日 8 公升
|
|
體積 Dimension（W x D x H）
|
137 x 53 x 136cm
|
|
重量 Weight
|
136kg
|
|
電源 Power
|
1 ψ ， 120V/60Hz,16A or 230V/50Hz, 9A,1800W（max）
|
Q8/UV紫外光加速老化試驗機測試方法
通用
• ISO 4892-1 Plastics- Methods of exposure to laboratory light sources-Part 1: General Guidance
• ASTM G-151, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
• ASTM G-154, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Non-metallic Materials
• British Standard BS 2782: Part 5, Method 540B （Methods of Exposure to Lab Light Sources）
• SAE J2020, Accelerated Exp. of Automotive Exterior Materials Using a Fluorescent UV/Condensation Apparatus
• JIS D 0205, Test Method of Weatherability for Automotive Parts （Japan）
• GB/T 16422.1，塑料實驗室光源暴露試驗方法 第1部分：總則
________________________________________
涂料
• ISO 11507, Paints & varnishes-Exposure of coatings to artificial weathering-Exposure to fluorescent UV and water
• ISO 20340, Paints & varnishes –Performance requirements for protective paint systems for offshore and
related structures
• ASTM D-3794, Standard Guide for Testing Coil Coatings
• ASTM D-4587, Standard Practice for Light/Water Exposure of Paint
• US Government, FED-STD-141B
• US Govt., Federal Specification TT-E-489H, Enamel, Alkyd, Gloss, Low VOC Content
• US Govt., Federal Specification TT-E-527D, Enamel, Alkyd, Lusterless, Low VOC Content
• US Govt., Federal Specification TT-E-529G, Enamel, Alkyd, Semigloss, Low VOC Content
• US Govt., Federal Specification TT-P-19D Paint, Latex, Acrylic Emulsion, Ext. Wood & Masonry
• NACE Standard TM-01-84 Procedures for Screening Atmospheric Surfaced coatings
• GM4367M Topcoat Materials - Exterior
• GM 9125P Laboratory Accelerated Exposure of Automotive Material
• Korean Standard M5982-1990, Test Method for Accelerated Weathering
• Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps
• Israeli Standard No. 330, Steel Windows
• Israeli Standard No. 385, Plastic Windows
• Israeli Standard No. 935, Road Marking Paint
• Israeli Standard No. 1086, Aluminum Windows
• NISSAN M0007, Fluorescent UV/Condensation Test
• JIS K 5600-7-8, Testing Methods for Paints
• MS 133: Part F16, Methods of Test for Paints and Varnishes: Part F16: Exposure of Coatings to Artificial Weathering- Exposure to Fluorescent UV and Water （ISO 11507）
• NBR-15.380 Paints for buildings–Methods for performance evaluation of paints for non-industrial buildings – Resistance to UV irradiation/water vapor condensation, by accelerated test
• prEN 927-6 Paints & varnishes–Coating materials and coating systems for exterior wood – Pt. 6: Exposure of wood coatings to artificial weathering using fluorescent UV and water
• GB/T 12967.4，鋁及鋁合金陽氧化 著色陽 氧化膜耐紫外光性能的測定
________________________________________
紡織品
• AATCC Test Method 186, Weather Resistance: UV Light and Moisture Exposure
• ACFFA Test Method for Colorfastness of Vinyl Coated Polyester Fabrics
________________________________________
印刷油墨
• ASTM F1945, Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting ________________________________________
橡膠
• GB/T 16585，硫化橡膠人工氣候老化（熒光紫外燈）試驗方法
________________________________________
電工電子產品
• GB/T 19394，光伏（PV）組件紫外試驗
type the link here
________________________________________
粘合劑和密封劑
• ASTM C 1501, Standard Test Method For Color Stability of Building Construction Sealants as Determined byLaboratory Accelerated Weathering Procedures
• ASTM C-1184, Specification for Structural Silicone Sealants
• ASTM C-1442, Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
• ASTM D-904, Standard Practice for Exposure of Adhesive Specimens to Artificial Light
• ASTM D-5215, Standard Test Method for Instrumental evaluation of Staining of Vinyl Flooring by Adhesives
• American Plywood Assn., Approval Procedures for Synthetic Patching Materials, Section 6
• Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps
________________________________________
塑料
• ISO 4892 Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps
• DIN 53 384, Testing of plastics, Artificial Weathering and Exposure to Artificial Light
• Spanish Standard UNE 53.104 （Stability of Plastics Materials Exposed to Simulated Sunlight）
• Israeli Standard No. 385, Plastic Windows
• JIS K 7350, Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps
• ASTM D-1248, Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
• ASTM D-4329, Standard Practice for Light/Water Exposure of Plastics
• ASTM D-4674, Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor
Fluorescent Lighting and Window-Filtered Daylight
• ASTM D-5208, Standard Practice for Exposure of Photodegradable Plastics
• ASTM D-6662, Standard Specification for Plastic Lumber Decking Boards
• ANSI C57.12.28 Specification for Accelerated Weathering of Padmounted Equipment Enclosure Integrity
• ANSI, A14.5 Specification for Accelerated Weathering of Portable Reinforced Plastic Ladders
• Edison Electrical Inst. Specification for Accelerated Weathering of Padmounted Equip. Enclosure Integrity
• Wisconsin Electric Power Specification for Polyethylene Signs
• GB/T 18950，橡膠和塑料軟管 靜態下耐紫外線性能測定
• GB/T 16422.3，塑料實驗室光源暴露試驗方法 第3部分：熒光紫外燈
________________________________________
屋頂材料
• ASTM D-4799, Test Method for Accelerated Weathering of Bituminous Roofing Materials
• ASTM D-4811, Standard Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing
• ASTM D-3105, List of Test Methods for Elastomeric and Plastomeric Roofing & Waterproofing
• ASTM D-4434, Standard Specification for PVC Sheet Roofing
• ASTM D-5019, Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane
• ANSI/RMA IPR-1-1990 Req. for Non-Reinforced Black EPDM Sheet for Roofing Membrane
• ANSI/RMA IPR-2-1990 Req. for Fabric-Reinforced Black EPDM Sheet for Roofing Membrane
• ANSI/RMA IPR-5-1990 Req. for Non-Reinforced Non-Black EPDM Sheet for Roofing Membrane
• ANSI/RMA IPR-6-1990 Req. for Fabric-Reinforced Non-Black EPDM Sheet for Roofing Membrane
• British Standard BS 903: Part A54 Annex A & D, Methods of Testing Vulcanized Rubber
• CGSB-37.54-M, Canadian General Standards Board Spec. for PVC Roofing & Waterproofing Membrane
• DIN EN 534, Corrugated bitumen sheets
• EOTA TR 010, Exposure procedure for artificial weathering
• RMA Specification for Reinforced Non-Vulcanized Chlorosulfonated Polyethylene Sheet for Roofing Membrane
免責聲明：以上所展示的[ 紫外老化測試儀]信息由會員[廣東宏展科技有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
