ZY6017塑料水平垂直燃燒試驗機
Plastic horizontal vertical burning test machine
一、適用范圍：Scope of application
主要用于對塑料或塑料部件處于50W火焰條件下,水平或垂直方向燃燒,測定塑料及塑料部件燃燒性能。以判斷塑料耐火等級。
Mainly used for the plastic or plastic parts in 50 w flame conditions, horizontal or vertical direction combustion, combustion performance determination of plastic and plastic parts. To determine the plastic refractory grade
二、 符合標準：Conform to the standard
符合GB/T2408標準
In line with the GB/T2408 standards
三、 燃燒箱體：Burning body:
3.1箱體：0.5m3，采用數控機床加工成型，圓弧造型美觀大方.優質SUS304不銹材料/烤漆，具有美觀防銹防腐等特點。
3.2箱體頂部設有抽風排煙系統，在試驗完成時，能將廢氣排出到室外；試驗過程中，此系統為停止狀態。
3.3箱體正面設有試驗過程中可以密封的鋼化玻璃觀察窗，便于觀察試驗情況。
Box 3.1:0.5 m3, USES the numerical control machine tool processing molding, circular modelling beautiful generous. High quality SUS304 stainless material/painting, has the characteristics of beautiful and rust corrosion.
Breeze for the 3.2 box at the top of the exhaust system, the test is completed, will waste gas discharge outside; During the trial, this system is to stop state.
3.3 enclosure front in the process of the test can be sealed toughened glass observation window, convenient for observation test.
四、 燃燒噴燈：Combustion burner
4.1本公司自制噴燈，完全符合IEC 60695-11-4：2004火焰A、B或C的要求。
4.2噴火口直徑：Ф0.95±0.3mm，噴汽口：Ф0.9±0.03mm，噴口距空氣進口高度為100±10mm
4.3噴燈角度：水平為90度，垂直為45度
4.4火焰高度：20±20。
4.1 this burner made by the company, fully conform to the IEC 60695-11-4:20 04 flame A, B or C request.
The crater diameter 4.2:0.95 + / - 0.3 mm, Ф steam jet mouth: Ф 0.9 + / - 0.03 mm, nozzle distance air inlet height is 100 plus or minus 10 mm
4.3 burner Angle: level is 90 degrees, vertical to 45 degrees
Flame height 4.4:20 + 20.
五、 測溫系統：Temperature measurement system
5.1熱傳感器（銅制導管和熱電偶）—導管結構應為傳導率高的電解銅。長度為8.8±0.02mm,直徑：Ф5.5±0.01mm
5.2 K型熱電耦，配0.5mm直徑的不銹鋼管做外套。
智能PID溫控表和K型熱電耦相匹配。其讀數可大1000℃。
5.3整過測試系統為：活動式，測溫時將其置于試驗箱內，進行測溫。
5.4配備電子秒表：到0.1S（在測溫校驗時備用）
5.1 thermal sensor (copper tube and thermocouples) - tube structure should be of high conductivity copper cathode. 8.8 + / - 0.02 mm in length, diameter, Ф 5.5 + / - 0.01 mm
5.2 K type thermocouple, do coat with 0.5 mm diameter stainless steel pipe.
Intelligent PID temperature control table and match the K type thermocouple. The readings can be 1000 ℃.
5.3 the whole test system is: the activity type, when the temperature to place it in test box, for temperature measurement.
5.4 equipped with electronic stopwatch: accurate to 0.1 S (standby) when temperature calibration
本頁產品地址：http://www.521uz.com/sell/show-4482532.html
免責聲明：以上所展示的[艾生－TEL-13723549851 塑料水平垂直燃燒試驗機]信息由會員[東莞中諾質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
