ZY6014H航空電線電纜燃燒試驗機
Aviation cable combustion testing machine
根據軍用標準GJB17.18-84<航空電線電纜試驗方法 燃燒試驗>標準制作。符合GJB17.18,MIL-W-186C22759D,81381A,ISOR1220,1491試驗標準。試樣兩端固定并垂直置于三面是金屬板的金屬罩中。點燃噴燈,使藍色內錐的在距試樣下端20mm處,與試樣表面相接觸。
According to the national military standard GJB17.18-84 air < wire and cable test methods combustion test > standard production. C22759d meet GJB17.18, MIL - W - 186, 81381 a, ISOR1220, 1491 test standard. Sample both ends fixed vertical on three sides is a metal plate and metal cover. Lighted torch, make the tip of the blue inner cone at 20 mm from the bottom sample, contact with the sample surface.
試樣與水平面成水平或成60°傾斜。
Sample with horizontal level or into 60 ° incline.
1,金屬罩：高600mm,寬360mm,深250mm,正面和頂部敞開,底部封閉。
2,燃燒燈：標準丙烷氣體燃燒燈。外焰為175mm,內焰為55mm
3,設定燃燒時間達到預設時間時,機器會自動停止點火。
4,點火為自動高壓電火。
5,燃料：瓦斯.甲烷(客戶自備)
6,通風柜由客戶提供和安裝
1, the metal cover: 600 mm, 360 mm wide, 250 mm deep, positive and open at the top, bottom sealing.
2, burning lamp: standard propane gas burning lamp. Outer flame is 175 mm, inner flame is 55 mm
3, set the burning time reaches the preset time, the machine will automatically stop firing.
4, fire ignition for automatic packing.
5, fuel, gas, methane () by advertisers
6, provided by the customer and installation of the fume hood
本頁產品地址：http://www.521uz.com/sell/show-4366201.html
免責聲明：以上所展示的[ZY6014H 航空電線電纜燃燒試驗機]信息由會員[東莞中諾臺灣質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
