VICKERS液壓泵,威格士液壓泵,伊頓液壓泵用途
As a general rule, the shortest spline engagement should not
Less than 85% of the spline section to ensure maximum shaft torque rating.
When the pump shaft directly co
nnected to the gearbox or reducer, push
Recommended spline shaft. Spline transmission should be lubricated.
Mounting seat Auxiliary transmission In the above oil condition,
The recommended minimum starting speed is typically 600 r / min.
But the pump specifications, system characteristics and enviro
nmental co
nditions can improve or reduce the speed,
VICKERS液壓泵帶有先導式安全閥和單向閥，油路形式為并聯油路。該閥結構簡單，泄露量小，安全閥啟閉性好，滑閥機能有O、P、Y、A幾種形式。定位方式有彈簧復位和鋼球定位兩種。主要應用于工程機械、礦山機械、起重運輸機械和其它機械液壓系統，用于改變液流方向，實行多個執行機構的集中控制。壓力補償元件，比例流量閥，電磁多路換向閥及各種功能閥組成，采用定量泵可實現比例多路換向控制回路，回路溫升低，無載功耗少，適應于中、小型液壓移動機械。
威格士電磁閥是由單向閥、安全閥、進油體、回油體和多個換向閥片組合而成的組合閥。以手動換向為主。它具有結構緊湊、工作壓力高、性能優異、工作可靠等特點。油路采用并聯油路。
VICKERS子母葉片泵特點
As the gap overlaps, the shaft and gearbox splines appear
The possibility of interference between. In order to reduce this possibility
Sex, should be used with the side of the spline. Side teeth fit
And short engaging length ratio with large splines or splines
Engage with large flexibility and smaller side load tendencies.
VICKERS液壓泵,威格士液壓泵,伊頓液壓泵用途
DG4V-3-0B-M-U-C6-60
DG4V-3-0B-M-U-H7-60
DG4V-3-22A-M-U-D6-60
DG4V-3-22A-M-U-H7-60-EN2-1
DG4V-3-2A-M-U1-H7-60
DG4V-3-2A-M-U-C6-60
DG4V-3-2A-VM-U-C6-60
DG4V-3-2A-VM-U-H7-60
DG4V-3-2A-Z-M-U-A6-60
DG4V-3-2A-Z-M-U-C6-60
DG4V-3-2C-M-FW-B6-60
DG4V-3-2N-M-U-A6-60
DG4V-3-2N-M-U-C6-60
DG4V-3-2A-M-U-C-60
DG4V-3-2C-H-U-L-CDL-60
VICKERS液壓泵,威格士液壓泵,伊頓液壓泵用途
本頁產品地址：http://www.521uz.com/sell/show-2604554.html
免責聲明：以上所展示的[VVP1-20RRM-30-CBK-10 VICKERS液壓泵,威格士液壓泵,伊頓液壓泵用途]信息由會員[上海乾拓貿易有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
