點擊圖片查看大圖
智能顆粒和粉末特性分析儀系列
Particle and powder characteristic analyzer
1. 功能介紹：Function Introduction
通過自動化測量技術，智能化測量系統，采用集成電路系統模塊；觸摸屏或PC軟件兩種操作模式并存：測試過程和測試結果通過PC軟件曲線圖位表示，并自動生成報表；采用7寸觸摸屏操控，本機配備中英文兩種語言，自帶通訊接口，具有儀器自我管理及故障排除；自我校正功能，環境溫濕度管理，多孔徑漏斗選擇，自帶稱重平臺，自動輔助下料攪拌系統，水平定位功能，為粉末粉體顆粒表征研究提供可靠和數據.廣泛應用于科研院所，大中院校，生產加工上下游企業實驗室及新品研發，質量管控提供數據依據.
Through high precision automatic
measurement technology, intelligent measuring system, adopting integrated
circuit system module;There are two modes of operation : Touch screen or PC
software: The test procedure and test results are represented by the PC
software curve, and the report is generated automatically.Using the 7-inch
touch screen, the machine is equipped with two languages in both English and
Chinese, with the communication interface, With the instrument self-management
and the troubleshooting function.Self-correcting function, enviro
智能顆粒和粉末特性分析儀系列二、測試項目：Test project
本儀器主要通過對粉末和顆粒振實密度、松裝密度、堆積密度、安息角（休止角）、抹刀角（平板角）、崩潰角、差角、質量流速、體積流速、分散性、空隙率等項目測量,綜合反映粉體流動性和表征特性狀況，通過卡爾指數，豪斯納比指數綜合評定物料流動性狀況.
This instrument is mainly throughthe
measurement of powder and granular tap density, apparent density, bulk
density, angle of repose( Angle of
repose), spatula Angle (flat angle), Angle of collapse, angle of difference,
mass flow rate, volume flow velocity , dispersity,
voidage, comprehensively reflec powder liquidity co
三、滿足標準：Meet standard
參照和標準：ISO902-1976; ISO4324;GB6521-86 ;ISO4490-1978; GB1482-84; ISO903-1976; GB6522-86 ;GB11986; DIN ISO 4324 – December 1983;USP（美國藥典）；BP（英國藥典）；EP（歐洲藥典）
Reference to internatio
規范要求GB/T16913-2008-4.5,GB/T1479.1-2011,GB/T5162-2006/ISO3953:1993;美國ATSM6393-08;歐洲藥典EP7.0中的07/2010:20934,美國藥典616.
The specification required GB/T16913-2008-4.5, GB/T1479.1-2011, GB/T5162-2006 / ISO3953:1993;ATSM6393-08 in the United States; 07/2010:20934 in EP7.0 of European pharmacopoeia, American pharmacopoeia 616.
智能顆粒和粉末特性分析儀系列四、技術參數資料Technical data
|
FT-2000A顆粒和粉末特性分析儀（多功能型） Particle and powder characteristic analyzer (multifunctional) |
FT-2000B顆粒和粉末特性分析儀（實用型） Particle and powder characteristic analyzer (Practical) |
|||
|
No |
功能Function |
量程measuring range |
分辨率 Resolution |
測試方式Test method |
|
1. |
松裝(自然堆積)密度 bulk density |
0-999.9999g/ml |
0.0001g/ml |
1.自動記錄質量，Automatic 2.輸入體積input volume |
|
2. |
振實密度 tap density |
0-999.9999g/ml |
0.0001g/ml |
1.定質量測試 fixed mass test 2.定體積測試Fixed volume test |
|
3. |
安息角（休止角） Angel of repose |
0-90度degree |
0.01度degree |
1.自動計算automaticcalculation 2.PC軟件過程數據曲線PC software process data curve |
|
4. |
質量流速mass flow velocity
|
0-9999.999g/s |
0.001 g/s |
1.自動計時并停止Automatic time 2.自帶稱重平臺weighing 3. PC軟件過程數據曲線PC software process data curve |
|
5. |
體積流速 volume flow rate
|
0-9999.999ml/s |
0.001 ml/s |
1.自動計時及停止Automatic timer 2.自帶稱重平臺weighing platform 3. PC軟件過程數據曲線PC software process data curve |
|
6. |
崩潰角 Angle of collapse |
0-90° |
0.01° |
1.自動計算automatic calculation 2.PC軟件過程數據曲線PC software process data curve |
|
7. |
平板角Flat Angle |
0-90° |
0.01° |
1.自動計算automatic calculation 2.PC軟件過程數據曲線PC software process data curve |
|
8. |
空隙率Voidage |
0-99.99% |
0.01% |
|
|
9. |
時間 time |
0-99999S |
0.01s |
自動Automatic |
|
10. |
差角angle of difference |
0-90° |
0.01° |
自動Automatic |
|
11. |
分散性dispersibility |
0-99.99% |
0.01% |
自動Automatic |
|
12. |
稱量平臺Weighing |
0-2000.0g |
0.01g |
自動Automatic |
|
13. |
漏斗容積 funnel volume |
200ml |
|
|
|
14. |
不銹鋼量杯選購 Stainless steel cup |
25ml、100ml、200ml、250ml、500ml |
（標配1個）
(standard co |
|
|
15. |
圓盤 disc |
直徑100mm和64mm（少量樣品測量）Diameter 100 mm and 64 mm (a small amount of sample measurement) |
休止角測量 To measure the Angle of repose |
|
|
16. |
攪拌裝置stirring |
固定轉速co |
自動Automatic |
|
|
17. |
漏斗出口口徑mm Funnel outlet diameter |
2.5；4.0；5.0；6.0；7.0；8.0；9.0；10；14；15；16；17；18；25 |
選購孔徑（標配5個）可更換結構
Optio |
|
|
18. |
出口配有控制閥門
co |
氣動控制Pneumatic co |
自動，氣源客戶自備Automatic, the gas customers are prepared |
|
|
19. |
振實密度玻璃量筒 Vibration density glass cylinder |
1）25ml，刻度高H:135mm，間距spacing 1ml 2）100ml，刻度高H:175mm，質量mass 130±16g 3）250ml，質量mass220±40g |
量筒固定座質量450±20g a fixed seat mass |
|
|
20. |
顯示器display |
7寸觸摸屏7 Inch Touch Screen |
|
|
|
21. |
溫濕度范圍Temperature humidity range |
18-40℃ 相對濕度在35-80% relative humidity |
自動Automatic |
|
|
22. |
流動指數Flow index |
自動轉化流動指數數據Automatic co |
自動Automatic |
|
|
23. |
輸入電源Input power |
220V±10% 常溫環境下使用Normal
temperature enviro |
|
|
|
24. |
PC軟件Software |
軟件1套；電腦打印機客戶自備. 1 sets of software; Computer and printer offered by customer. |
|
|
|
25 |
振動篩分粒度儀 Vibration sieving particle sizer |
篩網目數42目，60目，100目，200目325目滿足卡爾指數要求 The sieve mesh 42 mesh, 60 mesh, 100 mesh, 200 mesh 325 mesh to meet the requirements of the Carle index. |
均齊度和凝聚度測量 Homogeneity and cohesion measurement |
|
|
FT-2000A和FT-2000B區別 |
||||
|
FT-2000A自帶PC軟件具備曲線圖譜過程分析及報表管理功能 particle and powder characteristic analyzer (multi-function) Comes with PC software analysis function. |
||||
|
FT-2000B通過觸摸屏來操作，并獲得終結果數據，不具備過程數據分析，打印機處理數據； operate through the touch screen, And get the final result data, Without process data analysis, Need manual work to analyze the change trend; in addition , |
||||
